Sports complex "Street Workout" РТР 523-X

Complex consisting of: gymnastic trellises, set of different level bars, set of bars (11 elements), 2 horizontal benches, inclined bench, bars for climbing with hands, bars for climbing with hands in zigzag shape, gymnastic rings, table for armwrestling , information board with hangers for personal things.

The construction will consist of support pillars made of steel pipes with a diameter of at least 89 mm and a minimum thickness of 3 mm, on clamps without welded joints, horizontal bars of different levels made of steel pipes with a diameter of at least 33 mm. Vertical gymnastic trellis bars, hand climbing bars and zigzag hand climbing bars are to be made of pipe with a diameter of at least 33 mm, and support bars shall be made of pipe with a diameter of at least 42 mm . The horizontal bars of the parallels and conical parallels will be made of pipe with a minimum diameter of 42mm. The surface of the bench for the development of the abdomen, the table for armwrestling, the gymnastic rings will be made of HDPE with a thickness of at least 15 mm. The casing of the information panel will be made of pipe with a minimum diameter of 42mm, and its steel sheet will have a minimum thickness of 2mm. To avoid the penetration of water from precipitation, the pillars must be covered with plastic covers.

The metal elements need to be sandblasted and painted in an electrostatic field, in two layers with a minimum thickness of 100 microns to give them resistance to the external environment.

Material : steel, HDPE, plastic.

Technical characteristics . General dimensions (indicative) of the land, not less than: Length – 16000 mm, width – 7500 mm, Height: 3000 mm

The foundation of the complex will have minimum dimensions of LxWxH=400x400x700mm, and the foundation of the individual elements will have minimum dimensions of LxWxH=400x400x500mm.

Requirements for installation : To ensure safe and reliable operation, all supporting elements are to be deepened into the ground (ground) not less than 0.70m (0.5m – solitary elements) to increase rigidity, then following the concreting process ( concrete BC 300). The assembly of the elements must exclude the possibility of their disassembly, without the use of special purpose tools.

Download DWG drawing