Sports complex PTP 523-08-X

The field is intended for general development and improvement of physical condition through various types of exercises.

Complex consisting of: set of horizontal bars of different levels, Swedish ladder, horizontal bar with rings, hand-climbing bars, zigzag hand-climbing bars, target, parallel bars, inclined abdominal bench with handrails for push-ups, plyometric platforms, information panel with hangers for personal belongings .

The structure will consist of support pillars made of steel pipes with a diameter of at least 89 mm and a minimum thickness of 3 mm. The bars for the vertical gymnastic trellis, the hand-climbing bars, the horizontal bars of different levels and the zigzag-shaped hand-climbing bars will be made of pipes with a diameter of at least 33 mm and a minimum thickness of 2.8 mm.

Inclined abdominal bench with handrails for push-ups the construction will consist of support pillars made of steel pipes with a diameter of at least 89 mm and a minimum thickness of 3 mm. The surface of the inclined bench for abdominal development will be made of HDPE (high density polyethylene) without toxic components with a multilayer structure of various colors, with a thickness of not less than 15mm. The handrails for push-ups will be made of steel pipes with a diameter of at least 33 mm with a minimum thickness of 2.8 mm.

The information panel casing must be made of pipe with a minimum diameter of 42mm, and its steel sheet must have a minimum thickness of 2mm.

The target and surface of the plyometric platforms will be made of HDPE with a thickness of at least 10 mm, the gymnastic rings will be made of HDPE with a thickness of at least 15 mm.

To avoid the penetration of rainwater, the pillars must be covered with plastic caps.

The metal elements need to be sandblasted and painted in an electrostatic field, in two layers with a minimum thickness of 100 microns to make them resistant to the external environment.

Materials : steel, HDPE, plastic.

Technical characteristics : Overall dimensions of the land, not less than: Length: - mm, Width: - mm, Height: - mm.

In addition to the space occupied by the equipment, according to the regulations in force, a minimum impact area of ​​1.5 m-2.5 m will be provided.

The foundation of the complex will have minimum dimensions of Lxlxh=400x400x700mm.

Installation requirements : To ensure safe and reliable operation, all support elements are to be sunk into the ground (earth) no less than 0.70m (0.50m – solitary elements) to increase rigidity, then following the concreting process (BC 300 concrete). The installation of the elements must exclude the possibility of their disassembly, without the use of special purpose tools.