Play complex PTP 28-02

Components: The construction will consist of a tower without a roof, a straight slide made of HDPE (H=1m), a ladder, metal climbers of the "fireman's ladder" type, metal climbers of the "Liana" type.

The construction will consist of support pillars made of steel pipe with a diameter of at least 76 mm, minimum thickness - 3 mm, "fireman's ladder" and "liana" type climbers with a section of at least 33 mm and a thickness of 2.8 mm.

Steel ladder with a section of at least 33 mm and a thickness of 2.8 mm.

The slide must have:
- the starting area with a bumper, which will make the child sit down, fixed on the side protection elements, made of HDPE (high-density polyethylene without toxic components with a multilayer structure of various colors), with a minimum height of 450 mm and with a thickness of at least 15 mm;
- acceleration zone;
- braking portion.

In order to exclude the trauma of children, the slides will have boards on both sides with a minimum height of 120 mm. The slide will be made of HDPE polyethylene.

The floor of the tower will be round with a minimum diameter of 930mm and will be made of HDPE with a thickness of at least 15mm.

To avoid the penetration of water from precipitation, the pillars must be covered with plastic covers.

The metal elements need to be sandblasted and painted in an electrostatic field, in two layers with a minimum thickness of 100 microns to give them resistance to the external environment.

Materials: steel, HDPE, galvanized fasteners, plastic caps in the places of thread sutures.

Technical characteristics. General dimensions of the construction, not less than: Length – 2960mm, width – 2800mm, height – 1800mm.

The foundation of the construction will have minimum dimensions of LxWxH=400x400x700 mm.

Requirements for installation: To ensure safe and reliable operation, all supporting elements are to be deepened into the soil (earth) not less than 0.70m to increase rigidity, then following the concreting process (concrete BC 300). The assembly of the elements must exclude the possibility of their disassembly, without the use of special purpose tools.