Play complex PTP 21-03-T1

Components: The construction will consist of a tower with a roof, a straight slide, a staircase, a balcony railing, "fireman's ladder" type metal climbers, a "Hublou" panel, a sandbox, a "Clock" panel.

The construction will consist of support pillars made of steel pipe with a diameter of at least 76mm, minimum thickness - 3mm, "fireman's ladder" type climbers with a section of at least 33mm and a minimum thickness of 2.8mm. The HDPE ladder will have steps and handrails for safe ascent to the platform. The steps of the ladder must not be slippery and must be made of HDPE high density polyethylene with a thickness of at least 15mm. Lateral supports for fixing the steps must be made of high-density polyethylene HDPE with a thickness of at least 15mm.

The slide must have:
- the starting area with a bumper, which will make the child sit down, fixed on the elements
side protection, made of HDPE (high-density polyethylene without toxic components
with multi-layer structure of various colors), with a minimum height of 450 mm and a thickness of cel
a little 15 mm;
- acceleration zone;
- braking portion.

In order to exclude the trauma of children, the slides will have borders on both sides with
minimum height of 120 mm. The slides will be made of LLDPE polyethylene using the "rotomoulding" technology.

The floor of the tower will be round with a minimum diameter of 930mm and will be made of HDPE with a thickness of at least 15mm. The roof of the tower needs to be made of high-density polyethylene HDPE with a thickness of not less than 10 mm.

The sandbox, "Clock" panel, "Hublou" panel must be made of HDPE (high-density polyethylene without toxic components with a multilayer structure of various colors) with a thickness of no less than 15 mm.

To avoid the penetration of water from precipitation, the pillars must be covered with plastic covers.

The metal elements need to be sandblasted and painted in an electrostatic field, in two layers with a minimum thickness of 100 microns to give them resistance to the external environment.

Materials: steel, LLDPE, HDPE, zinc-plated fasteners, plastic caps in the places of thread sutures.

Technical characteristics. General dimensions of the construction, not less than: Length – 4770mm, width – 1500mm, height – 3400mm, platform height from the ground – 1500mm.

The foundation of the construction will have minimum dimensions of LxWxH=400x400x700 mm.

Requirements for installation: To ensure safe and reliable operation, all supporting elements are to be deepened into the soil (earth) not less than 0.70m to increase rigidity, then following the concreting process (concrete BC 300). The assembly of the elements must exclude the possibility of their disassembly, without the use of special purpose tools.

Download DWG drawing