The play complex consists of a tower without a roof (H=1.5 m), a tower without a roof (H=1.0 m), a double tower with a roof (H=1.1 m and 1.0 m respectively), a bridge with railings and protective panels, a bridge with "Wave" type railings and protective panels, a staircase with railings, a climbing net made of reinforced rope with a protective panel, a metal staircase with a protective panel, a straight slide (H=1.5m) with a protective panel, a straight slide (H=1.0 m) with a protective panel, a straight slide (H=1.5 m) with a protective panel, 2 protective panels of the "Lifebuoy" type, a panel "Chalk Drawing Board", three "Balcony" railings, a rotating steering wheel, a decorative element Flag.
Age: It is recommended for children aged 6+.
Designed for simultaneous use by a maximum of 10 children.
Maximum user weight: 55 kg.
The structure will consist of support pillars made of steel pipe with a diameter of at least 76 mm, minimum thickness - 3 mm.
The HDPE ladder will have steps and railings for safe ascent to the platform. The ladder steps must not be slippery and must be made of HDPE high-density polyethylene with a thickness of at least 15 mm. The side supports for fixing the steps must be made of HDPE high-density polyethylene with a thickness of not less than 15 mm. Transition railings - minimum height 700 mm, their pipe - section of at least Ø 33 mm.
The flexible ladder will be made of rope with a size of at least 16 mm made of polypropylene woven from 6 metal-reinforced fibers with a rubber core, connected by oval plastic elements.
The slide must have:
-
a starting area with a protective bar, which will make the child sit down, fixed on the elements of the side protection, made of HDPE (high-density polyethylene without toxic components with a multi-layer structure of various colors), with a minimum height of 450 mm and a thickness of at least 15 mm;
-
acceleration zone;
-
braking section.
In order to exclude injuries to children, the slides will have edges on both sides with a minimum height of 120 mm. The slides will be made of LLDPE polyethylene obtained by "rotomoulding" technology (linear low-density polyethylene), resistant to impact and UV rays.
The floor of the tower is to be round in shape with a minimum diameter of 930 mm and will be made of non-slip moisture-resistant plywood with a thickness of at least 15 mm.
The roofs of the double tower and the protective panels are to be made of HDPE high-density polyethylene with a thickness of not less than 10 mm.
To prevent water from precipitation from entering, the pillars are covered with plastic caps.
The metal elements need to be sandblasted and painted in an electrostatic field, in two layers with a minimum thickness of 100 microns to give them resistance to the external environment.
Materials: HDPE, LLDPE, metal pipes covered with powder paint, all connections are covered with special vandal-proof caps.
Technical characteristics. General dimensions of the structure, not less than: Length - 6000 mm, Width - 3500 mm, Height - 3400 mm. Platform height from the ground: level 1 - 1000 mm, level 2 - 1500 mm.
The foundation of the structure will have minimum dimensions of LxWxH=400x400x700 mm.
Installation requirements: To ensure safe and reliable operation, all support elements must be deepened into the ground (soil) by at least 0.70 m to increase rigidity, then the concreting process (concrete BC 300) follows. The installation of the elements must exclude the possibility of their disassembly without the use of special-purpose tools.
Download DWG model
