Horizontal bars with rings PTP 523-X.BA

Triple horizontal bars with rings They are suitable for pull-ups, abs and most bodyweight strength exercises.

The structure will consist of support pillars made of steel pipes with a diameter of at least 89mm and a minimum wall thickness of 3mm, on clamps without welded joints, horizontal bars and the horizontal bar for the rings must be made of steel pipes with a diameter of at least 33mm. The rings will be made of HDPE (high density polyethylene) without toxic components with a multilayer structure of various colors, with a thickness of not less than 15mm.

To avoid the penetration of rainwater, the pillars must be covered with plastic caps.

The metal elements need to be sandblasted and painted in an electrostatic field, in two layers with a minimum thickness of 100 microns to make them resistant to the external environment.

Materials : steel, plastic.

Technical characteristics : Overall dimensions of the land, not less than: Length: -- mm, Width: -- mm, Height: -- mm.

In addition to the space occupied by the equipment, according to the regulations in force, a minimum impact area of ​​1.5 m-2.5 m will be provided.

The foundation of the complex will have minimum dimensions of Lxlxh=400x400x700mm, and the foundation of the solitary elements will have minimum dimensions of Lxlxh=400x400x500mm.

Installation requirements : To ensure safe and reliable operation, all support elements are to be sunk into the ground (earth) no less than 0.70m (0.50m – solitary elements) to increase rigidity, then following the concreting process (BC 300 concrete). The installation of the elements must exclude the possibility of their disassembly, without the use of special purpose tools.