Fitness machine "Skior" PTP 525T

The equipment is predestined for the development of back and leg muscles.

Components : lower base, lever system, handles, footrest.

The support pillar of the equipment needs to be made of steel pipe, with a thickness of at least 3 mm and a minimum diameter of 130 mm, being mounted on a platform with holes for fixing with the foundation. The main structure of the equipment will be made of pipe with a diameter of 76 mm and a thickness of 4 mm. The rods will be made of rectangular pipe with a size of 60x40 mm and a thickness of 3 mm. The leg supports need to be made of polyethylene LLDPE through the "rotomoulding" technology. Static components will be built from a single element. In the case of mobile elements, the movement will be ensured by means of a system of joints resistant to the external environment. All articulated nodes will be equipped with reinforced closed-type bearings.

The rails are made of 33 mm diameter pipe with a thickness of 2.8 mm and will be covered with rubber to prevent the limbs from slipping.

All moving elements, heads, screws, nuts need to be covered with protective plastic covers. The metal elements need to be sandblasted and painted in an electrostatic field, in two layers with a minimum thickness of 100 microns to give them resistance to the external environment.

Materials : steel, LLDPE, rubber, zinc-plated fasteners, plastic caps in the places of thread sutures.

The foundation of the construction will have minimum dimensions of LxWxH=400x400x500 mm.

Requirements for installation : To ensure safe and reliable operation, all supporting elements are to be deepened into the soil (earth) not less than 0.50m to increase rigidity, then following the concreting process (concrete BC 300). The assembly of the elements must exclude the possibility of their disassembly, without the use of special purpose tools.

Minimum dimensions : length – 880 mm, width – 640 mm, height – 1600 mm. In addition to the space occupied by the equipment, according to the regulations in force, a minimum impact area of ​​1.5 m will be provided.

Download DWG drawing