Fitness machine "AIR WALKER" РТР 512T

Components : lower base, "U" shaped case, 2 swinging levers, foot platform, handle.

The support pillar of the equipment will be made of steel pipe, with a thickness of at least 3 mm and a diameter of 133 mm, being mounted on a platform with holes for fixing with the foundation. The casing will be built from a single element made of black pipe with a thickness of no less than 4 mm and a diameter of 76 mm. All the static elements connected to the housing will have a diameter of 27 mm, being made of steel pipe with a thickness of 2.8 mm, and the mobile elements have a diameter of 42 mm and a thickness of 2.8 mm. Leg supports will be made of LLDPE polyethylene (linear low-density polyethylene) by "rotomoulding" technology.

All static elements, heads, screws, nuts are covered with protective plastic covers.

The metal elements need to be sandblasted and painted in an electrostatic field, in two layers with a minimum thickness of 100 microns to give them resistance to the external environment.

Materials : steel, LLDPE, zinc-plated fasteners, plastic caps in the places of thread sutures.

The foundation of the building has dimensions of LxWxH=300x300x500 mm.

Requirements for installation : To ensure safe and reliable operation, all supporting elements are deepened into the soil (ground) not less than 0.50 m to increase rigidity, then following the concreting process (concrete BC 300). The assembly of the elements excludes the possibility of their disassembly, without the use of special purpose tools.

Minimum dimensions : Length – 1012 mm, Width – 554 mm, Height – 1495 mm.

In addition to the space occupied by the equipment, according to the regulations in force, a minimum impact zone of 1.5 m will be provided.

Download DWG drawing