Fitness machine "Leg press" РТР 505T

Components : support pillar, lower base, lever system, 2 chairs, footrests.

The support pillar of the equipment needs to be made of steel pipe, with a thickness of at least 3 mm and a minimum diameter of 133 mm, being mounted on a platform with holes for fixing with the foundation. All mobile components that support the weight of the body will be made of steel pipe with a minimum diameter of 48 mm and a thickness of at least 2.8 mm. All articulated nodes will be equipped with reinforced closed type bearings. The static components will be built from a single element. In the case of mobile elements, the movement will be ensured by means of a rocking system and joints resistant to the external environment. The seats and footrests will be made of LLDPE polyethylene (linear low-density polyethylene) by "rotomoulding" technology. All moving elements, heads, screws, nuts need to be covered with protective plastic covers.

The metal elements need to be sandblasted and painted in an electrostatic field, in two layers with a minimum thickness of 100 microns to give them resistance to the external environment.

Materials : steel, LLDPE, rubber, zinc-plated fasteners, plastic caps in the places of thread sutures.

The foundation of the construction will have minimum dimensions of LxWxH=300x300x500 mm.

Requirements for installation : To ensure safe and reliable operation, all supporting elements are to be deepened into the soil (earth) not less than 0.50m to increase rigidity, then following the concreting process (concrete BC 300). The assembly of the elements must exclude the possibility of their disassembly, without the use of special purpose tools.

Minimum dimensions : length - 2047 mm, width - 547 mm, height - 1835 mm. In addition to the space occupied by the equipment, according to the regulations in force, a minimum impact area of ​​1.5 m will be provided.

Download DWG drawing